New member just joined so apologies if this has been asked before (the query below). I originally joined as I was having problems programming a "12 Bit Extender 16 way IDC" board with it just going to the CPLD recovery menu even after the reboot following what claimed was a successful programming. However, the seller has since told me to send it back as it looks like a cold solder joint.
However, I do have a query concerning a ZX81. I know I can buy this board:
https://www.sellmyretro.com/offer/detai ... code-63615
which is based on a "RGBtoHDMI 6 way IDC" board as detailed here:
https://github.com/hoglet67/RGBtoHDMI/w ... o-computer
But is there anyway I can save some money and use the "12 Bit Extender 16 way IDC" board and just wire up a phono connector up to the relevant pins on the 16 way IDC instead?
However, I do have a query concerning a ZX81. I know I can buy this board:
https://www.sellmyretro.com/offer/detai ... code-63615
which is based on a "RGBtoHDMI 6 way IDC" board as detailed here:
https://github.com/hoglet67/RGBtoHDMI/w ... o-computer
But is there anyway I can save some money and use the "12 Bit Extender 16 way IDC" board and just wire up a phono connector up to the relevant pins on the 16 way IDC instead?
Statistics: Posted by G4DDS — Tue Jan 09, 2024 10:48 pm