32-bit acorn hardware • Re: PiEconetBridge and A3000 copy errors

Folks,

I've totally rebuilt the Raspberry PI this morning. It's looking much better, it's now coping files to risc machine much more reliable. I'll keep testing but looking better

changes I've made

• New PI Image from Raspberry PI as Lite with no desktop
  Latest Code from GitHub
  Change switch 4 to enable from disabled on the EconetHAT (4d board)
  Connected the Risc machine to Econet port on the EconetHAT not the a port Econethub.
  Added Samba for adding files of IP network
  Added my Discs again
  added second server for AUN access for remote emulators
  did NOT set clock speed and arm_freq, I've accepted the defaults
  created an SSH ASCII logon message saying ECONET. (I suspect this change was one which fixed it!!!!!)

so far, it's copied two large archives over the PIEconet via Econet without any issues. and it 'feels' slightly more responsive. last time, it failed very time these files were copied.

Thanks for the support from BeebMaster, Cr12925 and KenLowe.... hopefully I'm running now.

Statistics: Posted by Systemshark — Sat Dec 07, 2024 1:24 pm

---