Hi Folks,
Slowly moving forward with the Archie 3000. Been setting up software onto the ZIDEFS SD card from CJE which is working great now I have a mouse.
Thought I'd image the card to continue setup inside of Arculator with the aim to reimage back to card later to save time swapping floppies. I'm getting an error inside of arculator which if I continue and ignore, hangs the emulator at the RiscOS 3.11 initializing screen (mouse still moves). This is the error after giving it the HDF file to use in the arculator settings.As expected, the card has no windows partition tables visisble and appears as an entirely blank drive.
This is for an A3000 running RiscOS 3.11 with 4MB Ram and a CJE Micros ZIDEFS mini podule with a 2GB SD card attached to its IDE interface.
I've imaged the card using Win32Imager which creates a .IMG file I've renamed to .HDF and is about 1.85GB in size.
Any thoughts?
Slowly moving forward with the Archie 3000. Been setting up software onto the ZIDEFS SD card from CJE which is working great now I have a mouse.
Thought I'd image the card to continue setup inside of Arculator with the aim to reimage back to card later to save time swapping floppies. I'm getting an error inside of arculator which if I continue and ignore, hangs the emulator at the RiscOS 3.11 initializing screen (mouse still moves). This is the error after giving it the HDF file to use in the arculator settings.As expected, the card has no windows partition tables visisble and appears as an entirely blank drive.
This is for an A3000 running RiscOS 3.11 with 4MB Ram and a CJE Micros ZIDEFS mini podule with a 2GB SD card attached to its IDE interface.
I've imaged the card using Win32Imager which creates a .IMG file I've renamed to .HDF and is about 1.85GB in size.
Any thoughts?
Statistics: Posted by prefim — Tue Nov 12, 2024 8:42 am