8-bit acorn hardware • Re: CUB Monitor Image

Thanks Mark,

I've put a multimeter across the output to the degauss coil and sure enough no voltage when switching the monitor on. Its a T432, any recommendations for where I can find a replacement?

Thanks, Scott.

I've got a box load of them, I dare say Donberg will want an arm and a leg for one. You might be able to find them on eBay.
I can probably sell you one if you're stuck.

You don't need to fret too much about compatibility - there's quite a few variants around with different resistances but I don't believe it's very important in a CUB it pretty much just varies how long the degauss coil runs before it shuts off.
You'll find sales of "universal" PTC Posistors and this is what I've got and use regularly on CUBs.

Statistics: Posted by PJTech — Sun Oct 06, 2024 10:43 pm

---