I think I've got all the hardware sorted on my A7000, and have just added an i-cubed Etherlan 600 card to it, hoping to get it on my LAN. The card seems to be working correctly, but the Net configuration (double clicking !Boot) is greyed out and I get no network icon in the system bar (although I do get the Share FS disks appearing). Running *ehinfo gives me info from the Etherlan 600 card, but at the end says :
Driver Info![:-]( "Whistle")
RDC Failure in tx_mbufs() (unit 0)
Driver Error![:-]( "Whistle")
Datalen:690f > ETHERMTU, framelen:6913
Now, I've cobbled together a Risc OS 3.6 bootable hard disk from the downloads at http://www.riscos.com/ftp_space/360/index.htm, so it's quite possible I've not got things configured correctly. Adding the Ethernet card certainly slowed down the boot process (is it trying to boot from the network ?).
Any suggestions how I can try and troubleshoot/fix this ?
Driver Info
RDC Failure in tx_mbufs() (unit 0)Driver Error
Datalen:690f > ETHERMTU, framelen:6913Now, I've cobbled together a Risc OS 3.6 bootable hard disk from the downloads at http://www.riscos.com/ftp_space/360/index.htm, so it's quite possible I've not got things configured correctly. Adding the Ethernet card certainly slowed down the boot process (is it trying to boot from the network ?).
Any suggestions how I can try and troubleshoot/fix this ?
Statistics: Posted by cjed — Fri Aug 23, 2024 7:14 pm