I finally bit the bullet and removed most of the CRT related electronics. I decided I wanted a decent metal front plate to provide structural support and additional shielding / ground plane. I do not have a metal break so I used three eurorack aluminum panels screwed together.
In the following photos are the plate and a mockup of the installed LCD panel. I have to add proper standoffs to the LCD, probably something like 2cm or even an inch to get a satisfying elevation. Still, the mockup already looks promising.
In the following photos are the plate and a mockup of the installed LCD panel. I have to add proper standoffs to the LCD, probably something like 2cm or even an inch to get a satisfying elevation. Still, the mockup already looks promising.
Statistics: Posted by beatkamp — Sun Jul 07, 2024 4:16 am